INTEL D845PEBT2 SATA DRIVER
And it ran fine. The only thing I could think of doing is upgrading the mobo bios. I am an apprentice trained Electronics Engineer with qualifications to back it up. Driver installation wasn’t on the cd menu and the floppy with the drivers would just say that the disc wasn’t formatted when i accessed it. Disable the onboard if you want and install the drivers for the PCI card
|Date Added:||8 June 2004|
|File Size:||27.29 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Also, i don’t know exactly where the driver would be in the device manager, but i searched and didn’t recognize it there.
Allow other boot paths to be chosen. The only thing I could think of doing is upgrading the mobo bios. Why would my motherboard see the drive but not Windows? The disk may be there but not activated yet. Intec’s site shows a lot of upgrades since my version, but i’m just a trial and error idiot, so i’m guessing that’d be a mistake. You should have to do this only once.
Loading The Sata Raid Or Sata Driver – Intel DPEBT2 Product Manual [Page 45]
Don’t be concerned if the useful space for the setup is less than the total capacity. It was a Seagate. So i downloaded them from somewhere, installed them and now the only place on my system where the hard drive is recognized is in the bios under ‘bootable devices’. And it ran fine. Anyway, thanks for helping if you could. It warned me about gb possibly being the max or something but at that point i saha didn’t know and did it. Board index All times are UTC.
The Mother Board Motherboards. Yet to some people I still know nothing When the OS has pre-loaded into memory and requests a setup specification, choose a Gb partition size for the primary partition. It isn’t located anywhere in Windows dd845pebt2, as far as i know.
This is to be a second drive for storage. Use the “C” partition to install your OS. Once the OS has written to the hdd, you no longer have to reply to the ssata to boot from the optical drive. I have been programming on computers since the ZX I am an apprentice trained Electronics Engineer with qualifications to back it up.
And I did try to format the drive with the Windows cd, but not in that exact way. Format all partitions at this time, so you do not have to do so later. The primary is an ATA drive.
Driver installation wasn’t on the cd menu and the floppy with the drivers would just say that the disc wasn’t formatted when i accessed it. You can reset the boot order after the OS has finally run “on its own” for the first time. It’s always funny until someone loses an Operating System! The BIOS may recognize the hdd stats and present them, but may not understand them. Afer a lntel, I finally got my mobo to recognize the hard sxta in the bios.
Disable the onboard if you want and install the drivers for the PCI card Free tech support, motherboard ID, and more.
Intel Desktop Board D845PEBT2 – motherboard – ATX – Socket 478 – i845PE
Create an extended partiton of the size that is adequate, or divide the drive into three equal partitions. I didn’t make any partitions and just formatted the whole gb. I have been repairing computers since Well, first before inte Karlsweldt’s idea, I should have mentioned that this was the driver i tried: